Low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! Expandable at any time and can be used with DC or DCC formats. Plug & play RC servo-style wiring with connectors - no cutting or soldering needed! Mix & match components to customize your system using:

    Servo-based slow-motion Switch Unit
    Power Distribution Block
    LED panel indicator/control pushbutton switches
    Extension cabling
    3-Piece Drill Set
    2 Amp Power Supply

Product Information

Walthers Layout Control System brings you a low-cost solution for easy turnout control for HO, N, Z, S, and O Scale layouts! The system is expandable at any time to grow with your layout, and can be used with DCC- or DC-power (a built-in DCC accessory decoder is included). The system uses plug-and-play servo-style wiring with connectors, so no soldering is needed; two styles of cables are available separately to expand your wiring as needed. User-friendly instructions are included with all items, and drilling templates for easy mounting on your layout or fascia are included as appropriate. Using combinations of the system components, which include a servo-based slow-motion Switch Machine, Power Distribution Block, LED panel indicator/control pushbutton switches, add-on system cabling, a 2-amp 12V Filtered DC Power Supply and a three-piece drill set, you can easily build a complete control system.
 
The Walthers Layout Control System Switch Machine features:
 
  Fully assembled, servo-based unit with approximately one second throw speed
  Two built-in 5A switches to power frogs, signals and more
  Self-locking mechanism for reliable positioning - servo power turns off when motion is complete
  Adjustable throw & tension from 1/32" to 1/2" (1mm to 12mm) for turnouts in any scale from Z to O
  Factory-assembled with output rod in centered position for fast & easy under-benchwork mounting
  Wire in minutes with included cables
  Outputs for both single or bi-color LEDs
  Connecting cable included - easily expanded with Extension Cable (#942-113, sold separately)

Options include:
 
  Adjustable throw speed from .5 to 5 seconds
  Remote lock input for dispatcher to enable/disable local turnout control with CTC
  Single/Alternate bi-color LED modes
  Polarity route control for use of DPDT switch in place of fascia control.

SEE INSIDE FOR ADDITIONAL PARTS OF THE ENTIRE SYSTEM!!

Reservations Due By: September 30, 2017

Expected Release: March 2018

REB