Dear N Scale Customers:

MAERSK, is a Danish business conglomerate with activities in the transport, logistics and energy sectors. Maersk has been the largest container ship and supply vessel operator in the world since 1996. The company is based in Denmark, with subsidiaries and offices across 130 countries

Maersk Sealand Scheme; In November 1999: Maersk buys container shipper Sea-Land Corporation with 70 vessels, container terminals and liner service from CSX. The new name of the shipping company is Maersk Sealand.

In August 2005: A.P. Møller-Maersk announces that the purchase of P&O Nedlloyd has been completed. The company will be merged with Maersk-Sealand. Royal P&O Nedlloyd has a fleet of 162 container vessels with 460,203 TEU. From February 2006, the new company will be named Maersk Line.

  The largest operating unit in A.P. Moller–Maersk by revenue and staff is Maersk Line (Containers). Maersk Line containers are seen all over the world.

LIMITED RUN NTrak & T-Trak, Gateway 2020 commemorative container setEach set consist of one-53’ container and two-20’ containers, with a Special reversed integrated scheme that reads the same from both sides.

The deadline to reserve your commemorative GATEWAY 2020 Three pack set needs to be done before March 30, 2020. We will be closing this pre-order out for production requirements. 

* All New Tooling; -42- corrugated sides
* Seven different door variations tooled: molded as appropriate. Added 2 more door types - Now 9 Total door styles for the 40' HC container.
* IBC(Inter-Box Connecting pins) in scale ISO locations
* JTC Magnetic connecting system: 3-magnets bottom & metal top plate
* Detailed printing as per photographs
* Models come in packages of TWO, unless noted otherwise.
* The IBC pins Mate with JTC 40' open top containers with Magnets, JTC 20' containers with Magnets; Atlas 40 container, * JTC Flatrack containers, JTC 53' and 48' containers and future Jacksonville Terminal Company containers.
* Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top. 

* All New Tooling; -42- corrugated sides
* Seven different door variations tooled: molded as appropriate. Added 2 more door types - Now 9 Total door styles for the * 40' HC container.
* IBC(Inter-Box Connecting pins) in scale ISO locations
* JTC Magnetic connecting system: 3-magnets bottom & metal top plate
* Detailed printing as per photographs
* Models come in packages of TWO, unless noted otherwise.
* The IBC pins Mate with JTC 40' open top containers with Magnets, JTC 20' containers with Magnets; Atlas 40 container, * JTC Flatrack containers, JTC 53' and 48' containers and future Jacksonville Terminal Company containers.
* Compatible with JTC Retro-fit underframe kits to stack M-T and S-T brand containers on top.

40' HIGH CUBE CONTAINER

 Batch # 1 of our 40' HC containers will be shipping from the factory this week, so now is a good time for some details on this newly Tooled model. The model will have a magnetic system and 'IBC' pins for connecting with other containers. 'IBC' pin locations are based on scaling of 1:160, and are compatible with other brand containers with this same scaling location. We have tested, and this includes the Altas brand 40' standard height container. All JTC Intermodal containers in development will have this matching compatible system.Containers longer than 40’ will have ‘IBC' pins located at the 40’ ISO location, as most prototypes connect this way also. The model will have three magnets on the inside bottom and metal plates on the inside top. We feel that this is the best system for connectivity & compatibility. JTC also has Retro-fit under-frames in production to aid with compatibility with other brand containers. More on that in a separate information document.

 JTC takes modeling Intermodal seriously, and towards that Goal, we have tooled seven (7) different door configurations (below) to represent the prototype variances. Just as there are variances in boxcars & hoppers, Intermodal containers have a lot of noticeable variances in details also, especially in the doors. In 1:160 scale we do have some concessions that are practical to make, however, large items like doors are not one of those concessions – most of the time. With these seven door types, we can cover 95% of prototype schemes, there are still a few schemes that will need another door type.

 JTC has an aggressive schedule to produce an array of schemes to cover present-day activities, and of merged schemes that have been folded into larger conglomerates. So, get ready for a variety of Intermodal modeling opportunities, and explore the Intermodal scenes of Today, the 2000’s, and the 1990's, with these 40' HC containers and the growing JTC line of magnetically connected Intermodal model

Looking for more JTC Containers & Chassis? Click here!