– GATX Silver Lease 1958+ represents another repainted car, this time a “plain lease” car in silver. It is lettered in the 1950s style GATX lettering, and by this era, the stripes are no longer applied above and below the reporting marks. While a “plain” scheme, you can look closely and spot the reporting marks on the frame as well as the safety valve testing data on the tank. These simple cars are always popular so don’t miss out!

 

– GRYX John H Grace Black Lease 1968+ is the first offering of two in this run that are targeted to the late 1960s and 1970s modeler. These cars were leased by John H Grace and were stenciled in 1968. They include ACI labels which of course are appropriate for the era.

 

– HPCX Hercules Powder Company Black Lease 1970+ is another cool car for the 1970s modeler. These cars were leased to Hercules Powder Company but did not receive the Hercules logo. They did, however, receive the same gold lettering standard on their other leased tank cars. Check out that accurate ACI label on the side of the tank! If you look closely at the underframe lettering, you can spot this well-traveled tank car’s ATSF Los Angeles Repack data as well as the T&P Fort Worth, TX IDT markings.

 

– MOBX Mobil Oil Company Black Lease 1960+ replicates a Mobil Oil Company restenciled tank car from 1960. This car features compartment gallonage data on each end of the tank, accurate for this scheme and era

 

 

General American produced the 6000 Gallon 3-Compartment tank car on the “Type 30” riveted underframe from 1928 to 1942 at General American’s Sharon PA factory. While General American constructed many different tank designs, this 6,000 Gallon, 3-Compartment car was a memorable design that was leased by multiple shippers. The 3-Compartment design allowed consignees to receive up to three different grades of products, such as oils or chemicals. This was important in manufacturing facilities for example, where multiple lubricating oil types could be received in smaller quantities, but within one car. Chemical shippers also gravitated to these cars to ship different products to a common receiver. Additionally, some shippers utilized “split waybills” so that 1-2 compartments of the car could be unloaded at one customer, and the balance 1-2 compartments could be unloaded at a second customer located at a different location, usually in a different city or town.

 

Example commodities these multi-compartment cars hauled:

• Linseed oil

• Silicate of Soda (made with caustic soda and sand) sometimes referred to as sodium silicate.

• Printing ink

• Lubricating Oil

• Motor Oil

• Gasoline

• Tallow

• Varnishes

• Acids

• Solvents

• Alcohols

• Acetates

• Vegetable Oils

 

These tank cars were extremely long lived, lasting well into the 1970s and 1980s with virtually no modifications. The Tangent Scale Models GA tank car is a visually distinctive model that includes different brake hardware accurate for each paint scheme. Also, note Tangent Scale Models “true-to-life” colors and “hyper-accurate” lettering including exact fonts and lettering placement. Finally, Tangent Scale Models scale replicas operate as well as they look, equipped with free-rolling all-metal wheels inside their Tangent “spring plank” truck and Kadee scale couplers. Tangent Scale Models models are truly ready to run.

 

Features for Tangent Scale Models General American 1928-Design 6000 Gallon 3-Compartment Tank Car replicas include:

• Dimensional accuracy – designed from General American plans

• Highly correct “true to life” colors

• “Hyper-Accurate” lettering including exact fonts and lettering placement

• Multiple road numbers for each scheme where appropriate

• Fully riveted body

• Fully riveted underframe

• Separately applied tank handrail

• Separately applied tank strap detail

• Heater line and outlet drain details, including correct side profile between tank and underframe when viewing the car from the side

• Full AB brake detail and air line

• Dimensionally-correct hazardous and route placards

• “Near-scale” draft gear box with side detail

• Road-specific brakewheels for each scheme

• Wire grab irons and coupler lift bars

• Separate air hoses

• High-quality Tangent Scale Models 50-Ton ASF cast steel truck with spring plank

• CNC-machined 33” wheels with accurate front and back profile detail

• Replacement semi-scale wheels available separately from Tangent

• Genuine Kadee scale “scale-head” couplers

• Recommended age 14 years and older

 

 

Order Due Date: Available Now

Anticipated Delivery Date: April 2024

Looking for more Tangent Scale Models Tank Cars? Click here!

---