Train Addiction Help Line: 1.866.840.7777

Oct 10, 2024 - HO Scale

NARC - HO Scale - NSC - Special Commemorative Canpotex (NSCX) 1 Rd # (9000 Car Built)

 

 

Dear HO Scale Customers:

In October 2022 National Steel Car built their 9,000th car for Canpotex. We were asked by NSC if we could get this car for them. We will be building these for NSC this April 2025. If you would like a copy please let us know. We will only do the car once.

 

Version 9 Car

Introduced in 1999 by National Steel Car, this car is seen in large numbers across Canada and the United States. It was developed specifically to address the need for additional rail transport capacity caused be the growing Potash market.

Previously, the majority of Canadian Potash rail transport was accomplished with the larger Hawker Siddeley 4550 cu ft Cylindrical Hoppers and similar cars from National Steel Car and Marine Industries.

Though the car is a newer design, it has less capacity than the Hawker Siddeley style cars. However it makes up for this in a shorter car length of only 47 feet versus the Hawker Siddeley style cars at 59 feet. This allows a train of these cars to carry more Potash then a train of comparable length made up of the Hawker Siddeley style hoppers.

These car operates at a gross rail load of 286,000 pounds, the current maximum limit. However, they are actually designed for a gross rail load of 315,000 pounds. They are currently produced with 100 ton nominal capacity trucks to suit present 286,000 lb. gross rail loading. If the maximum weight limit is increased, these cars can be upgraded with 125 ton trucks allowing for maximum cargo capacity going forward. 

These cars are currently operated in large numbers by both Canpotex and the Potash Corporation of Saskatchewan, and in smaller numbers by other operators. To date, over 7,000 have been produced in six versions. These cars are seen on a daily basis traveling across the Canadian Pacific, Canadian National, BNSF, CSX, NS and Union Pacific rail networks.

Modeling use for prototype accuracy:

  • The Canpotex CMTX scheme can be modeled from late 2020 to present and can be mixed with all paint schemes with the exclusion of the early Canpotex PTEX scheme which had be phased out by the introduction of these cars.

Version 4 Car Prototype Features:

  • Car length of 47 feet
  • Car capacity of 4300 cu. ft.
  • Circular roofwalk tread pattern
  • Long cross roofwalk panels running the full width of the car
  • Raised roof hatches
  • 9 running board supports
  • 9 side panel sheets
  • Full length side sills
  • A car end configuration 2
  • B car end configuration 1
  • No wraparound ladder rungs
  • Angular shape gaps between hopper bays
  • Barber S2 DH trucks

Model Features:

  • Fully researched and prototypically accurate details
  • Many separately applied detail parts, including photo etched brass and lost was castings
  • Accurate painting and lettering, including correct graphics, fonts and locations as per prototype
  • Kadee # 58 couplers
  • NARC High Performance Low Friction trucks and metal wheelsets for reliable operation
  • Properly weighted for smooth tracking and superior performance

Road Number 9000

 

  •  NSCX 9000
  •  

 

 

More Information

For more information about the National Steel Car Potash Service 3 Bay Covered Hopper and their use by Canpotex & PotashCorp, including prototype videos & modeling notes, click on the links below:

NSC Potash Service Hopper Guide

Canpotex Hopper Reference Page

PotashCorp Hopper Reference Page

Photo courtesy National Steel Car





 

 


Product Details


Return to HO Scale