All Rivet Counter Freight Cars Feature

• Fully assembled

• Multiple road numbers

• Factory-applied metal grab irons, coupler cut levers, and trainline hoses

• Intricate brake plumbing

• Photo-etched stainless-steel see-through end crossover platforms

• Printing and lettering legible even under magnification

• Accurately profiled .110″ wide wheel tread

• Weighted to Industry standards for reliable operation

• Operates on Code 70, 83 and 100 rail

• Packaging safely stores model

• Color matched to existing Tru-Color Paint colors whenever possible

 

Additional Features

• All-new model

• Car rack numbers and ARR rack clearance data is specific to each car number

• 14 photo-etched metal side panels

• Separate end door rods

• Rivet details on colored panels represent either bilevel or trilevel versions

• Four body types

•  
  • Early
  • Intermediate
  • Late
  • Current

• Upper side panel mounting

•  
  • Upper side panel mounting with four recessed tabs and full width strip
  • Upper side panel mounting with three outside mounting tabs and no strip

• Lower side panel mounting

•  
  • Lower side panel mounting with three outside mounting tabs and full width strip
  • Lower side panel mounting with four lower recessed tabs and ¾ width strip

• End doors

•  
  • Early end doors with flat angle panels and photo etched metal side sill locking rings
  • Late end doors with “zig-zag” angle panels

• End sill configuration

•  
  • End sill grab irons and no side sill grab irons
  • End sill grab irons and side sill grab irons
  • End sill steps and side sill grab irons

• Side ladders

•  
  • High mounted side ladders
  • Low mounted side ladders

• Brake cylinder and brake beam mounting brackets

•  
  • Inside side sill brake cylinder and brake beam mounting brackets
  • Outside side sill brake cylinder and brake beam mounting brackets

• Brake rod support brackets

•  
  • Inside side sill brake rod support brackets
  • Outside side sill brake rod support brackets

• Photo etched metal defect card holder

• Additional tube type defect card holder (if applicable)

• Durable die-cast metal semi-scale long-shank Type E couplers

• All-new ASF low deck swing motion trucks with rotating axle bearing caps

• 28” machined metal wheels

• Highly detailed underbody brake system with wire form brake rods and air line plumbing, photo etched metal brake rod and air line plumbing support brackets; plastic brake beams, air reservoir, brake cylinder, control valve and retainer valve

• Minimum radius: 24”

• Recommended radius: 26”

 

Road Number Specific ScaleTrains

KCS/Yellow/TTGX

• Era: 2014 to present

• Series TTGX 619049-619308, built 4/14 to 6/14

• Stenciled “BI” for bilevel

• Early body type

• Upper side panel mounting with four recessed tabs and full width strip

• Lower side panel mounting with three outside mounting tabs and full width strip

• Three main bodies of rack mounting holes in painted side panels

• Early end doors with flat angle panels and photo etched metal side sill locking rings

• End sill grab irons and no side sill grab irons

• High mounted side ladders

• Inside side sill brake cylinder and brake beam mounting brackets

• Inside side sill brake rod support brackets

• Additional tube type defect card holder

• Paint matches Tru-Color Paint colors: body TCP-089 light imitation gold; roof TCP-354 galvanized steel