Alco’s early diesel switchers, in the 1930s, were characterized by a high engine hood that reached almost to the cab roof. This was necessitated by the height of the McIntosh & Seymour inline 6-cylinder diesels that powered the new engines. Each cylinder in the massive four-stroke motors displaced 1,595 cubic inches, compared with 567 cu.in. per cylinder in Electro-Motive’s two-stoke diesels.

But in 1939, Electro-Motive introduced its SW1 switcher, with a lower hood and more cab windows that allowed it to brag about “full front vision.” In response, Alco redesigned its engine mounts to allow the motor to drop into a recess in the frame, and in 1940 introduced its S-1 and S-2 switchers, with a greenhouse-like cab that offered ample visibility in all directions. The two models differed mainly in power output. The normally aspirated S-1 with 600 h.p. booted many a small steam switcher from railroad rosters coast to coast. Turbocharging gave the S-2 1000 h.p., allowing it to replace larger steam switchers and branch line engines like 2-6-0s, 2-8-0s and 2-8-2s. The S-series rode on Alco’s own Blunt trucks, named for the in-house engineer who designed them to negotiate the tight turns and less-than-perfect track often found on switching assignments.

Introduced just in time for World War II’s crush of traffic, the S-2 became a best-seller. Rare was the Class 1 railroad that did not own a fleet of them, and short lines coast-to-coast rostered them as well. By the end of production in 1950, more than 1500 S-2s had been delivered. The engines proved extremely durable, with many earning their keep into the 1970s and ’80s, and a number still operating today in tourist railroad and short line service. Like most Alco engines with turbochargers, S-2s are known by railfans as “honorary steam locomotives,” for the bursts of smoke they emit when their turbochargers rev up on acceleration.

Features:

• Intricately Detailed, Durable ABS Body

• Die-Cast Truck Sides, Pilots and Fuel Tank

• Metal Chassis

• Metal Handrails and Horn

• (2) Handpainted Engineer Cab Figures

• Authentic Paint Scheme

• Metal Wheels, Axles and Gears

• (2) Remote-Controlled Proto-Couplers

• Prototypical Rule 17 Lighting

• Directionally Controlled Constant Voltage LED Headlights

• Illuminated LED Number Boards

• (2) Precision Flywheel-Equipped Motors

• Operating ProtoSmoke Diesel Exhaust

• Onboard DCC/DCS Decoder

• Locomotive Speed Control In Scale MPH Increments

• Proto-Scale 3-2 3-Rail/2-Rail Conversion Capable

• 1:48 Scale Proportions

• Proto-Sound 3.0 With The Digital Command System Featuring Freight Yard Proto-Effects

• Unit Measures: 12” x 2 3/4” x 3 3/4”

• Operates On O-31 Curves

Looking for more Atlas O S-2 Diesel Locomotives? Click here!