Caboose Industries

Slidebar travel of 0.165" makes these usable for both HO and N scale. The SPDT contact can be used to power a turnout frog, a signaling system, or a relay coil. A shim to raise the stand to tie level and five different end fittings to connect to most turnouts are provided. Hook end for ATLAS, blade for ROCO, hole for PECO, Sm. Rnd. pin for Micro Eng. and round pin for SHINOHARA and others.

Our description: Strong, self-lubricating black Delrin ground throws with external cam for strength and maximum throw. Molded on pin for direct mounting. Measurements indicate the maximum amount of side-to-side travel when the lever is thrown.

All 100 series (Rigid) stands require modelers to fabricate a spring connecting link between the stand and the turnout. All 200 series units (Sprung) have internal springs so they can be connected directly to the turnout throwbar. [Be sure you know which one you want to order! – PWRS]

The most complete ground throw includes set of five fittings for use with Roco, Micro Engineering, Peco, Atlas and most other commercial turnouts. Also includes parts to assemble one low current SPDT contact set. [If this is what you want to buy, see these SKUs only: 119R - $5.58 each; 220S - $5.80 each; or 224S for N scale code 55 - $5.90 each - PWRS]