Train Addiction Help Line: 1.866.840.7777
Aug 5, 2021 - Periodical News
DCC Concepts - All Scales - Ground Signal Control and Other Accessories
Dear PWRS Customers,
DCC Concepts has new Ground Signal Interface Boards and other accessories!
You asked us if it would be possible to power and change the signals directly from our Cobalt Turnout Motors - so we listened and created a very clever little product which allows our Ground Signals to be linked directly to Cobalt Turnout Motors with no additional power source or switching!
How does it work?
The Ground Signal Interface Board couldn’t be simpler to install! Use the included leads to connect to the Cobalt iP Digital, iP Analog or Omega turnout motor, then plug in your Alpha Mimic Ground Signals. It really is that easy! Take a look at the connection instructions below (click the image to see it full size)...
Available in single or triple packs, everything you need to connect your Alpha Mimic Ground Signals is included. When you change your turnout, the aspect on your signal will then change automatically!
We carefully designed the Ground Signal Interface Board to fit neatly into this recess on the side of your Cobalt Turnout Motor to keep things really tidy under the baseboard! Just use a small piece of double- sided tape to hold the board in place.
Available either individually or in a handy triple pack, the Ground Signal Interface Board also represents fantastic value when combined with our Alpha Mimic Ground Signal Packs!
These clever little circuit boards will allow you to connect and control DCCconcepts Mimic Ground Signals directly from any of our Cobalt Digital or Analog turnout motors.
Supplied with 2 and 3-wire plug-&-play connection leads for very easy installation.
Also Available:
DCC Concepts - All Scales - Cobalt Value Pack (Selection of parts and accessories)
A combination of tools, accessories and spare parts to make installation Cobalt Motors easy and trouble free even if you lose the odd screw. (Suitable for all Cobalt variants)
DCC Concept - All Scales - Cobalt Key Spares (Single Pack)
A set of all fittings usually packed with Cobalt, including throw wire, fulcrum, fulcrum screw and 5 mounting screws. (Suitable for all Cobalt variants)
Ideal if you need a replacement Cobalt throw arm for replacing your point motor on another layout.
DCC Concepts - All Scales - Cobalt Relay Extension Board
Cobalt REX is an infinitely flexible set of add-on changeover relays that can be operated all at once or in pairs. Cobalt REX can be used with “normally open” or “normally closed” type switches, triggered by detectors and other things. Cobalt REX is very easy to use and totally configurable to meet almost any need…
Combine REX and Cobalt-S switches or Cobalt motors and there are NO limits to the control abilities, interlocking or any sort of direct device automation!
If you want to make REX DCC-addressable, simply add an AD1HP to switch multiple devices with a single digital command!
Want More DCC Concepts Products? Click Here!
Order Due Date: Augusts 15, 2021
Anticipated Delivery Date: October 2021
Product Details
© 2024 Pacific Western Rail Systems
Train Addiction Help Line: 1 866 840 7777